Pacemaker Boat Owners Association

I whould like to know if you have diaphragm style pumps I whould like to buy them if you have them also bildge pumps

I might, I can be reached @ 484-894-4677 this is my cell #,,if I do not answer please leave A message and I will return your call.
.

what size and type of generator do you have, and does it run?

Steve give me A call on that please.

Jimmy, I would look really close at your local scarp yards. The price of Monel R is very high. I just scrapped my 44ft flushdeck pacemaker and I made $1000.00 just for the two monel fuel tanks. They were 130 gal tanks. So might be well worth your while to clean them out and scrap them. I ended up making over $4000 just on the brass/copper/stainless steel scrap. The exhausts were of course copper heat exchangers and they weighed in at 80Lb each. That's alot of copper, I think I remembered a little over 500lbs of copper with the wiring and exhausts. But it was hard work, I salvage every inch of wiring and burnt it off. Every brass screw that I could. Took me two weeks hard work but Making $4000 in two weeks wasn;t bad and I still have the diesel generator and twin diesel engines I will be listing for sale soon.

Good Luck , Denny

I scrap copper and in michigan they will not buy burnt copper so I would chech before burning it

The tanks are gone, I couldn't help myself the scrap yard took them for 4.50 A pound they weighed 300 pounds combined they were not Monel-R they were Monel 400 alloy which was worth more then the R. As for the generator I promised it to Danno if he still wants it, still waiting on the parts I need to get it going. I will say however the inside is sweeet.
However I still have hull planks and other lumber and parts available for anyone still interested.

this is what it looked like when I pulled the head. I still have to clean it yet though. but for sitting as long as it did it looks awesome I almost want to keep it...lol

a rel="nofollow" href="http://s832.photobucket.com/albums/zz244/slightlycrazy454/?action=view&current=" target="_blank">

What do you want for the head basin?

I still have some stuff left for sale, let me know if anyone needs anything. If I have it make me an offer and it's yours. the light covers are gone though sorry. Again my cell number is 484-894-4677

Hello, do you still have any items left for sale? I am looking for a few pieces of flat stainless steel that were used in interior doorways and to seam-off Nautolex exterior decking vynal. This original part is flat, 3/4" wide, and predrilled with countersink for #6 screw heads. Secondly, I am also looking for the stainless steel runners/guards that are fastened vertically on the hullsides at the transom edge. Also I would be interested in some planking. Noticing your 484 area code, I am in the Philadelphia are and would love to see what else you might still have available.

any ofthe 3/8 inch quaerter round avalible? (UPDATE Ended up getting some 1/4 round fabricated at my local wood company)

hey looking for the two fiberglass side air scoops (not aluminum louvered) let me know thanks bcs

Sorry guys, I have been so buisy that I havent been on for A while. Parts are still available if anyone needs them for spring... thanks Jimmy. S

Ok all,
Does anyone have A use for A nice set of engine stringers??

[IMG][/IMG]