All Discussions
↳ Pacemaker → Wanted
-
Hydraulic helms and cylinder Installing hydraulic steering on my 40 ft 1973 pace. Need two helms and cylinder
-
25 Alglas SF Air Scoops ?! Looking for these babies - must be from 25 Sport Fish not express as they are different- Thanks- BCS
-
Wanted - Pacemaker Wahoo Center Console - Looking for Volvo Penta Duo Prop - Jack Shaft Model Looking for hull or partial project in need of repower or turn key.
-
Looking for line drawings of 1976 Pacemaker Motoryacht, 40'I think this is the right category, so here goes: I am looking for the line drawings of a 1976 Pacemaker Motoryacht, 40', to be used in a specific ...
-
Rub Rail Looking for a rub rail for my 1979 33SF rigid vinyl with SS insert.
-
Looking for a Hydraulic Helm We are looking for a helm for a 1970 48 footer.If anyone knows of one or has one PLEASE let us know.
-
Ventilation Board (Peg Board), drilled on 1/2" centers - Used on the Wooden PacemakersDoes anyone know of a source for the original hardboard "peg board" that was used for ventihilation in vaious areas of the Pacmaker's interior and exterior. It ...
-
Stainless Steel - Floor Seam Covering Strips, 3/4" wide.This particular stainless steel item is 3/4" wide with counter sunk holes drilled for #6 screws about every 3 inches. It will be used in various lengths ...
-
cabin doorI ended up building a replacement out of oak for my 25' express. I used a "biscut" tool to help keep everything in place and all the original ...
-
Outriggers I am looking for a set of outriggers for my 36 1988 sf can anyone help me [8D]
-
Wanted: Shift Lever Complete or just shift lever bracketHello, The bracket on one of my shift levers broke and I am looking to replace it. If anyone has one complete or just the bracket please let me ...
-
Specs. on a 1968 Alglas 25 need specs. on 1968 alglas 25. Just bought one and need to know fuel tank size,etc. Anything will help.
-
Broken 1.25" shaft strut from a 1976 26' PM I have an accidental two piece shaft strut , I could really use a one piece. Any ideas?
-
crusader 260 engines need pair of matched carburtors for my 32 ft pacemaker has twon 260 crusaders or how to change to electronic egnition and cost dennis 586-303-6418
-
7.5 A23 Kohler Gas GensetI have completely torn down my 7.5 A23 Genset for a rebuild and found out that the 3rd cylinder wall is scarred beyond repair and I have to ...
-
Wanted: 6.5 KW generator My 1976 36' SF is missing her generator. Anyone want to sell one?
-
Aluminum rub rail The rub rail is probably stainless steel. If so it's available at Jamestown Distributors www.jamestowndistributors.com They have several different types. Good Luck, Daynor
-
Hatch cover Looking for a hatch cover for the forward hatch of a 1972 32' Convertible Sedan Bridge
-
chrysler transmission mounts looking for 4 in good shape. have paragon trans, but borg warner will also work from what i've gathered. thank's paul.
-
Windlas Anchor manual windless i am avallable for the next few months lol
Log In or Sign Up
Are you new here? Click the Become a Member button below to join the action.
Categories
- All Discussions 2642
- Community Interest
- General News and Guidelines 74
- Meet & Greet 143
- Pacemaker
- General Discussion 564
- Solutions 78
- Classics - wood 123
- Alglas 152
- Late Models - fiberglass 157
- Restoration & Projects 244
- Photos 186
- Literature 71
- Liveaboards 11
- Old Forum Archive 1
- Work Shop 0
- Electrical & Electronics 62
- Mechanical 214
- Log Book 0
- Destinations 4
- Trip Logs 8
- Galley 1
- Equipment, Recipes & Ideas 5
- Trading Dock 1
- Buy & Sell 357
- Wanted 166
- Commercial Ads & Links 20
